Back to the measurement guide
KAREM WOODCRAFT · PRODUCT PLANNING

Between-post measurement worksheet

Label each opening A–F on a simple site sketch and on your photographs. Record the actual clear opening in millimetres; keep any different top and bottom measurements in the notes.

Project / site reference (optional)
Name / contact (optional)
Measure the clear opening between the inside faces of two postsThe dimension line begins at the inner face of the left post and ends at the inner face of the right post. Post widths are excluded.CLEAR OPENING — INSIDE FACE TO INSIDE FACERecord in mm · exclude post widthsPostPost
BayClear-opening width
mm		Height to discuss
mm / reference point		Run
level / stair		Notes / photograph reference
Top-bottom differences, corners, post changes
A
B
C
D
E
F

☐ Bay letters match sketch and photos   ☐ Pattern code noted   ☐ Assembled / kit preference noted   ☐ Stair runs shown separately

Pattern, rail preference and extra site notes

Planning measurements only. Do not deduct fitting clearances unless instructed. Confirm final manufacturing sizes, height, spacing, supports and fixings for your project. Studio input uses metres: a 2,700 mm opening is entered as 2.7 metres. Karem Woodcraft · 03 9720 7266 · sales@karemwoodcraft.com.au